If you’ve ever stood in a plastic molding shop, watching a die-cast or injection mold click into place to churn out everything from a toddler’s sippy cup to a automotive bumper, you’ve probably underestimated the quiet workhorse beneath that process: plastic mold steel. As a supplier who’s helped mold makers troubleshoot die failures and upgrade tooling for over a decade, I’ve seen firsthand how choosing the wrong grade of steel can turn a $1,000 mold into a $10,000 headache—while the right grade can keep a production line running for years without a single repair. Plastic Mold Steel

Let’s cut through the jargon, because mold steel grades aren’t just arbitrary numbers on a spec sheet; each is engineered for a specific job. Below, I’ll break down the most common grades you’ll encounter in the industry, why they matter, and what makes each one a go-to for different molding applications.
First, a quick primer: Plastic mold steels are categorized based on their composition, hardness, and heat treatment capabilities. The two biggest factors that drive grade choice are the type of plastic being molded (some plastics, like PVC, release corrosive chemicals that eat away at steel) and the production volume (a low-run prototype mold has totally different needs than a mold that will produce 1 million parts a year).
1. P20: The Workhorse for General-Purpose Molding
P20 is the grade most mold makers reach for first, and for good reason. It’s a pre-hardened steel, meaning it’s heat-treated to a consistent 28–32 HRC (Rockwell Hardness Scale) before it ever leaves the mill—no additional hardening needed, which saves time and cuts down on distortion during machining. That consistency is critical for mold makers who need tight tolerances; P20 machines smoothly, takes a polish well, and has enough toughness to handle the stress of everyday injection molding.
For what is P20 used? It’s the gold standard for medium-volume runs (10,000 to 100,000 parts) of non-corrosive plastics: think consumer electronics housings, toy parts, thin-walled packaging, and small automotive components. Here’s the catch, though: P20 isn’t designed for high volumes, and it struggles with corrosive plastics like PVC or nylon that have additives that break down during molding. Those additives etch the steel’s surface over time, leading to rough parts that require constant mold polishing. If you’re molding something that doesn’t involve those corrosive materials, P20 will usually check all the boxes without a big price tag.
Over the years, I’ve had customers come to me upset because their P20 mold wore out after only 50,000 parts—usually because they tried to use it for a high-volume project or a plastic with harsh additives. A quick swap to a grade like H13 fixed their problem immediately, no extra cost for the mold itself. That’s the kind of on-the-ground advice I live for.
2. H13: The High-Volume Tough Guy
If P20 is the workhorse, H13 is the heavyweight champion. H13 is a hot-work tool steel, meaning it’s made to withstand repeated exposure to high temperatures (the kind generated by molten plastic during molding) without deforming or cracking. Unlike P20, it isn’t pre-hardened at the mill; it’s supplied in an annealed state, so mold makers can machine it to their exact dimensions, then harden it to 48–52 HRC via quenching and tempering. That extra hardness makes it far more resistant to wear than P20.
H13 is the go-to for high-volume production runs (100,000 parts and up) of almost any non-corrosive plastic. It’s a favorite for automotive parts—think door panels, instrument clusters, and engine brackets—that need to hold up to daily use. It’s also widely used for large, heavy molds, like those for refrigerator doors or pallets, because its toughness means it can handle the stress of closing and opening thousands of times without chipping.
The downside? H13 is more expensive than P20, and the heat treatment process adds extra time and cost to mold production. It also doesn’t handle corrosive plastics any better than P20. But for anyone looking to maximize mold lifespan on a long-running project, H13 is almost always worth the investment. I’ve had repeat customers who use H13 for molds that still run perfectly after 5 million parts—something you could never get with P20.
3. S7: The Tough, Wear-Resistant Workhorse for Demanding Jobs
Let’s say you have a mold that needs to be both tough and extremely wear-resistant—for example, a mold for thick, abrasive plastic parts, or a mold that will be dropped or moved frequently during production. That’s where S7 comes in. S7 is an air-hardening tool steel, which means it hardens when cooled in air (no need for oil quenching, which can cause distortion), and it has much higher impact toughness than both P20 and H13. It hardens to 55–58 HRC, putting it right between P20 and H13 in hardness, but it’s far more resistant to chipping and cracking under sudden stress.
S7 is ideal for molds that produce abrasive materials, like filled plastics (those with glass fibers or mineral additives that scratch and eat away at steel over time). It’s also used for prototype molds that will be tested in production before a permanent mold is ordered, because it can handle more stress than P20 even though it’s still relatively affordable for a tool steel. I’ve worked with a medical device manufacturer that used S7 for a prototype mold for a surgical tool; the prototype survived 10,000 test runs, while their previous P20 prototype failed after 2,000. It’s a small difference in steel grade that makes a huge impact on timeline and cost.
The only downside to S7? It’s not as widely used for high-volume production as H13, and it’s a bit more expensive than P20. But for the jobs where toughness matters most, it’s hard to beat.
4. 420 Stainless: The Corrosion Fighter
Here’s where things get specialized. If you’re molding plastics that release corrosive chemicals—PVC, nylon with fire retardants, or even some medical-grade plastics—you need a steel that can resist that corrosion. That’s 420 stainless, a martensitic stainless tool steel that combines hardness with excellent corrosion resistance. Like P20, it’s pre-hardened (to 42–46 HRC) so it’s ready to machine right out of the box, and it polishes to a mirror-like finish, which is perfect for parts that need to look smooth, like cosmetic packaging or food-grade containers.
420 stainless is the standard for molds that handle corrosive plastics. The chromium in its composition forms a protective oxide layer that prevents the plastic’s additives from etching the steel surface, which means your mold will produce consistent, high-quality parts for far longer than a P20 mold would. It’s also used for medical and food-grade molding, where cleanliness and corrosion resistance are non-negotiable.
Wait, but there’s a catch with 420: it’s not as tough as P20 or H13, so it can crack under heavy impact. And it’s more expensive, especially if you need the higher hardness grades (some 420 can be hardened up to 50 HRC for extra wear resistance). For low-to-medium volume runs of corrosive plastics, though, it’s the only grade you need to consider. I recently had a customer who was molding PVC pipe fittings; their old P20 mold needed to be polished every 10,000 parts. Swapping to 420 cut that downtime to once every 50,000 parts, and their part quality improved because the corrosion no longer left marks on the inner diameter.
5. 416 Stainless: The Free-Machining Corrosion Resistant Grade
If you’re looking for a stainless steel that’s easier to machine than 420, 416 is the answer. 416 is a free-machining stainless tool steel, meaning it has added sulfur to make it cut faster, which is perfect for mold makers who have tight turnaround times. It’s also corrosion-resistant, though not quite as much as 420—so it’s best for less corrosive plastics, or for molds where machining speed is a higher priority than maximum corrosion resistance.
416 is commonly used for small, simple molds, like those for bottle caps or small consumer goods, where the mold is machined quickly and doesn’t face extreme corrosion or high wear. It’s cheaper than 420, which makes it a popular choice for low-cost tooling, but it’s not a good fit for high-volume or highly corrosive applications.
6. Nak80: The High-Polish, Precision Grade for Top-Tier Parts
Last but not least, Nak80 is a premium pre-hardened mold steel designed for molds that need ultra-smooth finishes and tight dimensional control. It’s a chromium-molybdenum steel, pre-hardened to 40–44 HRC, and it polishes to a near-mirror finish without any imperfections—something that’s critical for parts like high-end cosmetic packaging, phone frames, or automotive interior trim that need a flawless surface.
Nak80 also has excellent stability, meaning it won’t warp or change size during machining or molding, which is why it’s the go-to for complex molds with tight tolerances. It’s more expensive than P20, but for parts that demand a premium finish, it’s worth every penny. I’ve had a luxury electronics manufacturer that used Nak80 for their smartphone case molds; their parts had a consistent, scratch-resistant finish that their competitors couldn’t match with P20.
How to Pick the Right Grade for Your Project
At the end of the day, choosing the right plastic mold steel grade comes down to three questions:
- What type of plastic are you molding? (Corrosive, abrasive, or general?)
- What’s your production volume? (Low, medium, or high?)
- What are your part requirements? (Toughness, finish, or corrosion resistance?)
A general-purpose mold for 5,000 toy parts doesn’t need H13. A mold for 1 million PVC pipe fittings can’t use P20. A mold for a surgical device needs 420 stainless. There’s no one-size-fits-all, but the good news is that there’s a grade for every job.

As a supplier, I don’t just sell steel— I help people avoid the mistakes that come with picking the wrong grade. I’ve seen too many mold makers order a low-cost steel and end up paying more in downtime and repairs than they would have for the right grade upfront. If you’re gearing up for a new project, or if your current molds are wearing out faster than they should, don’t hesitate to reach out. We can walk through your needs, compare grades, and help you pick the option that will keep your production running smoothly and save you money in the long run.
Cold Work Steel References
- Design of Plastic Injection Molds, 2nd Edition, M. G. Arnone, Industrial Press, 2000.
- Tool Steels: Metallurgy and Applications, 3rd Edition, George E. Totten, ASM International, 2005.
- “Corrosion Resistance of Tool Steels for Plastic Molding,” Journal of Manufacturing Processes, Vol. 12, No. 2, 2010.
Kunshan Guanghouhong Mold Materials Co., Ltd.
We are one of the most professional plastic mold steel manufacturers and suppliers in China, also support customized service. Please feel free to wholesale high quality plastic mold steel in stock here from our factory. Also, pricelist is available.
Address: Factory Building No. 4, No. 882 Jujin Road, Zhangpu, Kunshan City, Suzhou City, Jiangsu Province
E-mail: 17599021145@163.com
WebSite: https://www.guanghouhong.com/