If you’ve ever worked in biopharma, cell culture labs, or even medical device manufacturing, you know how non-negotiable sterile, consistent components are for every step of production—and vial inserts are right there with them. As someone who’s spent the last 12 years supplying vial inserts for labs, clinical trial sites, and small biotech startups, one of the most common questions I get at trade shows, follow-up calls, and even random lab supply runs is this: Can vial inserts be autoclaved? Vial Insert

It’s not a yes or no question, and the answer depends on way more than just the insert itself—so let’s break this down, from the science of autoclaving to the real-world lessons I’ve learned supplying inserts to teams that rely on them.
First, let’s get clear on what autoclaving is, and why it matters for vial inserts. An autoclave uses saturated steam under pressure (usually 121°C at 15 psi, for 15 to 20 minutes) to eliminate 100% of microbial contaminants, including spores, which makes it the gold standard for sterilizing heat-stable lab and medical equipment. For vial inserts, which sit inside glass or plastic vials to hold, separate, or preserve samples, drugs, or reagents, sterilization can’t leave behind residual chemicals, warp the insert, or alter its shape—because even a 0.1mm change in a polypropylene insert’s dimensions can throw off a automated liquid handler, ruin a drug formulation, or contaminate a cell sample.
Now, not all vial inserts are made the same. That’s the biggest mistake people make when asking about autoclaving: they assume all inserts are interchangeable. As a supplier, I work with three core materials for vial inserts, each with very different responses to autoclaving, and I’ve seen firsthand what happens when a lab uses the wrong one for their sterilization process.
First up: polypropylene (PP) vial inserts. This is the most common material for general-purpose inserts, like the 0.5mL or 1mL conical inserts used for storing small drug aliquots, cell pellets, or ELISA samples. PP is a polyolefin plastic with a high melting point (around 160°C), so it holds up really well to standard autoclave conditions—if the autoclave run is done correctly. But here’s the catch: not all autoclave cycles are the same. I had a client a couple years back, a mid-sized biotech working on a cancer vaccine, who tried autoclaving PP inserts at the end of a full 30-minute extended cycle (they’d added extra time to account for larger batches). When they pulled the inserts out, a third of them had warped—their conical tips had folded over, and the wall thickness had thinned enough that the inserts leaked when they loaded the vials with vaccine. That’s a huge problem for a product that requires sterile, precise dosing. The issue wasn’t the insert material—it was the cycle. Standard autoclave times for PP should be 15 minutes at 121°C, not 30. If a lab is using a dry heat cycle, or a higher temperature for heat-resistant materials like glass, that’s a no-go for PP. I now include a one-page autoclaving guide with every bulk order of PP inserts, outlining temperature limits and cycle times, because too many teams skip that step.
Second: polystyrene (PS) inserts. This is a far less common, but sometimes used for single-use, low-stakes applications, like temporary sample storage in a lab that doesn’t need long-term sterility. PS has a much lower melting point (around 100°C) than PP, so standard autoclaving will turn it into a lumpy, unusable mess. I’ve had clients reach out, frustrated, because they autoclaved PS inserts and they melted into a plastic blob at the bottom of the vial—ruining a batch of samples they’d prepped for a clinical trial. That’s why I never supply PS inserts for applications that require sterile processing; we clearly label them for non-sterile use only, and I make a point to tell lab managers that if they ever need a sterile insert, PS is not the material. It’s a small detail, but it’s prevented so many costly mistakes.
Third: polyethylene terephthalate (PET) and cyclic olefin copolymer (COC) inserts. These are the specialized materials for high-stakes applications, like injectable drug packaging, single-use bioreactor components, or sample inserts for mass spectrometry. PET has a melting point around 250°C, and COC is even more heat-resistant, so both hold up perfectly to autoclaving—but there’s another factor here: leachables and extractables. Even if the insert doesn’t warp, the heat and steam of autoclaving can cause trace chemicals in the material to leach out, which is a big deal for injectable drugs or cell culture media. That’s why when we supply these specialized inserts, we perform pre-sterilization leachables testing, and we note exactly which autoclave cycles are approved. I had a client last year, a pharmaceutical startup working on a biosimilar insulin, who insisted on autoclaving their COC inserts even though we told them our pre-sterilized inserts were already sterile. They ran the cycle anyway, and when they tested their insulin batches, they found trace amounts of oligomers leached from the insert into the drug solution. That cost them three months of delays while they re-validated their process, and we adjusted our communication after that to make it clear: for many high-purity applications, using pre-sterilized inserts (which we provide via ethylene oxide or gamma irradiation, per industry standards) is not just easier—it’s safer and more reliable than autoclaving.
Now, let’s talk about the exceptions to this rule, because there are times when autoclaving inserts is necessary. For example, a small lab that does custom cell culture work might use non-sterile inserts, autoclave them, and then use them for a single experiment. That works only if the lab is using PP, and if they follow the cycle guidelines: 121°C, 15 psi, 15 minutes, no dry heat, and a slow exhaust cycle to prevent sudden pressure changes that can warp the insert. I also always warn labs to let the inserts cool completely before handling them—if you grab a hot insert and bend it, it will retain that shape permanently, or crack when it cools.
Another key point: packaging matters. If inserts are pre-packaged in their original plastic bags, autoclaving the whole package can work—but you need to make sure the packaging material is autoclave-stable. Most of our bulk inserts come in polyethylene bags, which hold up, but if a lab is using a thin PVC bag, that will melt during autoclaving. I’ve had a lab send us photos of their autoclaved insert bags that looked like wrinkled plastic wrap, and that’s exactly why we specify compatible packaging materials in our product descriptions.
Now, let’s get real about the myths around autoclaving inserts. I hear all the time that “autoclaving any insert ruins it” or that autoclaving is always the best way to sterilize. Neither is true. For low-stakes, single-use lab applications, autoclaving PP inserts works if done correctly. For high-stakes, injectable, or long-term storage, pre-sterilized inserts are the better choice, because autoclaving can introduce leachables or change the insert’s dimensions in hard-to-measure ways. For PS inserts, it’s never worth attempting—they’ll melt, waste time and money, and possibly contaminate your samples.
As a supplier, my priority isn’t just selling inserts—it’s making sure my customers don’t run into the mistakes I’ve seen over the years. I’ve worked with teams that thought autoclaving would save them money, only to end up scrapping thousands of dollars worth of samples. I’ve also worked with teams that didn’t know their inserts were made of PS, so they tried to autoclave them and had to reorder for a trial deadline. That’s why I make every effort to communicate clearly about what works, and what doesn’t, before a customer even places an order.

If you’re reading this and you’re in a lab, a biotech startup, or a pharmaceutical team, and you’re not sure whether your vial inserts can be autoclaved, don’t guess. Don’t rely on a generic internet answer—reach out. I’m here to walk you through your specific use case, your insert material, and what sterilization process will work best for you, no matter what stage of development you’re in. Whether you’re prepping for a small experiment, a mid-sized clinical trial, or a commercial drug launch, I can help you pick the right insert and the right sterilization method to keep your work on track.
AutoSample Vial References:
- ISO 11134:2017, Sterilization of health care products—Requirements for validation and routine control of industrial ethylene oxide sterilization
- USP <1229>, Residual Solvents: Contaminants in Pharmaceutical Products
- FDA Guidance for Industry: Container Closure Systems for Packaging Human Drugs and Biologics (2015)
- ASTM F88/F88M-15, Standard Test Method for Seal Strength of Flexible Barrier Materials
Rufluor Sealing Tech (Ningbo) Co., Ltd.
With abundant experience, we are one of the most professional vial insert manufacturers and suppliers in China. Please rest assured to wholesale high quality vial insert made in China here from our factory. We also accept customized orders.
Address: No.37, Shiji Road, Mazhu, Yuyao, Zhejiang
E-mail: andy@rufluor.com
WebSite: https://www.rufluor.com/